tomato is one of the sensitive fruits to mechanical impacts and physical tensions. the mostmechanical damages arise from handling which results in reducing tomato quality. in this study,impact energy effect has been studied in 3 different levels 0, 0.14 and 0.25 j by a pendulum impactapparatus, on changes of physicochemical properties of tomato, hybrid variety shiva f1, includingripening factor...

in the current study an experimental/statistical approach addressing key mechanical properties (compressive, tensile and flexural strength) and impact resistance of such new fibers with inclusion of different volume of polyphenylene sulfide (pps) fibers has been carried out on 288 specimens. results from this study revealed that compressive, tensile and flexural strength exhibit a good fit with...

Tomato is one of the sensitive fruits to mechanical impacts and physical tensions. The mostmechanical damages arise from handling which results in reducing tomato quality. in this study,impact energy effect has been studied in 3 different levels 0, 0.14 and 0.25 J by a pendulum impactapparatus, on changes of physicochemical properties of tomato, hybrid variety Shiva F1, includingripening factor...

mechanical damages inflicted upon seeds in harvesting, handling and further subsequent processes are worth attention because they unfavourably influence the quality of seed. seed damage results in lower grain value, storage problems, and reduced seed germination and seedling vigor, resulting in a subsequent diminishing yield of future crops. the present experiments were conducted to determine t...

physicochemical and mechanical properties of wheat grains can have a great impact on the quality of the final products (bread). therefore, correct selection of wheat cultivar for specific applications seems to be crucial. in this study, the differences in the physicochemical and mechanical properties (under compression and impact loadings) of ten iranian wheat cultivars (azar2, alamut, bam, bah...

Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...

Bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. This microstructure has shown ultimate tensile strength of about 2.2 GPa, noticeable uniform elongation in the range of 5 to 30%, hardness values of about 600 to 670 HV and impact toughness in the range of 30 to 40 MPa m1/2. With ca...